Contact Veritas Consulting

Please leave your details below and somebody will get back, today.

Enquiry Form

  • This field is for validation purposes and should be left unchanged.

Written by
on 22 October 2020

Share

In March of this year, an APPG report highlighted the dangers of and lack of awareness around silica dust. What can designers do about it?

In the 1970s, the use of asbestos – once considered a miracle construction material – nosedived when its potentially fatal effects were revealed. Widely used in multiple applications thanks to its tensile strength and impressive insulating effects, the material was banned in the UK in 1999 for its tendency to cause lung diseases and cancers when inhaled.

Though existing asbestos remains a threat during refurbishment and demolition projects, over 20 years on from its banning in the UK, designers and architects are now able to specify much safer materials, with the awareness of asbestos dramatically reducing exposure.

But asbestos is not the only worry for those who specify materials and take responsibility for project planning. Recently, concerns have been raised about another threat to the health and safety of those working in construction: silica dust.

What is silica?

Silica is a naturally occurring substance in common building materials such as concrete, bricks, tiles and mortar. When left alone, it is perfectly safe, but when these materials are drilled into, cut, or otherwise fractured, the naturally occurring silica becomes respirable crystalline silica or RCS. Workers near to the materials when this fracturing takes place can inhale the airborne dust and, over time, potentially develop silicosis, an untreatable but entirely preventable lung disease.

Silicosis occurs over several years of exposure to silica dust which puts construction workers and those in similar roles, such as demolition and quarrying, at extremely high risk. Early symptoms include a persistent cough, shortness of breath, and can ultimately be fatal due to respiratory failure.

The next asbestos?

In March 2020, an All Party Parliamentary Report on the dangers of silica was published in partnership with B&CE, entitled ‘silica – the next asbestos?’ In the report, the government was urged to take the threat of silica seriously and highlighted that there is an extensive lack of awareness of silica and silicosis in the UK, particularly in the construction industry.

The report made several recommendations to minimise the risk of silica dust to those in construction and beyond. These include:

  • Making silicosis a reportable condition under RIDDOR, alongside conditions such as carpal tunnel syndrome, asthma, and tendonitis.
  • Creating industry awareness through targeted programmes.
  • Screening for those exposed to RCS.
  • Lowering the workplace exposure limit to bring RCS into line with other developed countries.

The Health and Safety Executive has warned that silica is the biggest risk to construction workers after asbestos, with around 600,000 workers having been exposed in the UK.

What can designers do?

The responsibility to minimise silica exposure runs across the entire construction sector, but architects and designers have an especially important role to play. The APPG report states that designers, when planning construction projects, should do everything in their power to prevent RCS exposure.

Silica Dust risk assessment

In the first instance, the potential of exposure should be designed out entirely wherever possible. Stating that there is no ‘acceptable’ level of RCS exposure, the report suggests that designers aim to ensure cutting and fracturing is done offsite, at specialised facilities with high levels of controls, such as exhaust ventilation, water suppression, and professional respiratory equipment.

The report also says if offsite manufacture cannot be achieved, then cutting on site should only be done with the highest quality controls in place. Many designers are already aware of the risk of RCS and as such specify off-site manufacture – but too many projects utilise on-site cutting to reduce cost and time involved.

Furthermore, potentially life-saving PPE such as professional-grade masks are overlooked in favour of less expensive options, despite being zero-rated for VAT and tax-deductible.

Though these tactics may save money in the short term, they can be far more costly in the long run, both in human terms and possibly financial, if it is found that the responsibility to protect workers was shirked.

Overall, the report calls for complete elimination of RCS exposure wherever possible, with workers on-site using respiratory protective equipment only as a last resort.

Jim Shannon MP, chair of the APPG, said: “The inquiry has given us real insights into the outstanding work carried out in the construction industry and the hazards that are too often part of everyday life for those who work within it. We hope that the outcomes of the report will assist the Health and Safety Executive, the Government and the construction industry to protect its workforce from preventable injury and illnesses.”

Like asbestosis, silicosis is terrible but ultimately preventable through awareness and safe, thoughtful planning. Designers and architects, as well as those with health and safety responsibilities throughout the life of any project, should be aware of this risk and take all necessary steps to lessen its impact.

For more information on silicosis, or for professional, impartial health and safety advice, call Veritas Consulting on 0800 1488 677, or use the contact form above.

A chartered health and safety consultant with 20+ years of experience. David provides how-to articles, advice and guidance to make compliance easier for construction professionals, Architects and the built environment. When David is not helping clients with his unique mix of knowledge and experience, he enjoys being a good dad, a good partner and prefers drinking wine to beer. Known to be good with compliance and a corkscrew. Twitter, Facebook and Linkedin.

Leave a Reply

Your email address will not be published. Required fields are marked *